INSPECTION PROCEDURE 2: Excessive Body Rolling
WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
DIAGNOSIS
- STEP 1. Check for broken or deteriorated stabilizer bar.
Q: Is the stabilizer bar in good condition?
YES : Go to Step 2.
NO : Replace it, then go to Step 3.
- STEP 2. Check the strut assembly for damage.
Q: Is the strut assembly in good condition?
YES : Go to Step 3.
NO : Replace it, then go to Step 3.
- STEP 3. Retest the system.
Q: Is the malfunction eliminated?
YES : The procedure is complete.
NO : Return to Step 1.