Control Link Ball Joint Dust Cover Inspection

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: Do not damage the control link ball joint dust cover during maintenance.

Using your fingers, press the dust cover to check for a crack or damage.
If the dust cover has a crack or damage, replace the control link. (Refer to LOWER ARM .)
NOTE: If the dust cover has a crack or damage, the ball joint could be damaged.
If the dust cover is damaged during maintenance, replace the dust cover. (Refer to LOWER ARM CHECK .)