Door Window Glass Adjustment
WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
Check that the door glass operates smoothly and moves along the door glass run channel when the door window glass is fully raised and fully lowered. If there is a problem, adjust by the following procedure.
- Remove the door trim assembly (Refer to DOOR TRIM ).
- Remove the waterproof film (Refer to REMOVAL AND INSTALLATION ).
- Remove the grommet from the adjusting hole < Vehicles with 9 speakers (Rockford Fosgate® premium sound system) >.
- Remove the power window switch from the removed door trim, and connect it to the connector, then set the channel guide mounting bolt to the adjusting hole. (Refer to REMOVAL AND INSTALLATION ).
- Raise the door window glass and loosen the channel guide mounting bolts to adjust tilting up/down of the glass.
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.