Trouble Symptom Chart

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: During diagnosis, a diagnostic trouble code associated with other system may be set when the ignition switch is turned on with connector(s) disconnected. On completion, check all systems for diagnostic trouble code(s). If diagnostic trouble code(s) are set, erase them all.

TROUBLE SYMPTOM CHART

Trouble symptom	Reference page
Central door locking system does not work at all.	INSPECTION PROCEDURE 1: Central Door Locking System does not work at All
Central door locking system does not operate even when door lock switch of power window main switch operated (door lock switch of front power window sub switch operate normally).	INSPECTION PROCEDURE 2: CENTRAL DOOR LOCKING SYSTEM DOES NOT OPERATE EVEN WHEN DOOR LOCK SWITCH OF POWER WINDOW MAIN SWITCH OPERATED (DOOR LOCK SWITCH OF FRONT POWER WINDOW SUB SWITCH OPERATE NORMALLY).
Central door locking system does not operate even when door lock switch of front power window sub switch operated (door lock switch of power window main switch operate normally).	INSPECTION PROCEDURE 3: CENTRAL DOOR LOCKING SYSTEM DOES NOT OPERATE EVEN WHEN DOOR LOCK SWITCH OF FRONT POWER WINDOW SUB SWITCH OPERATED (DOOR LOCK SWITCH OF POWER WINDOW MAIN SWITCH OPERATE NORMALLY).
A door cannot be locked or unlocked by the central door locking system.	INSPECTION PROCEDURE 4: A DOOR CANNOT BE LOCKED OR UNLOCKED BY THE CENTRAL DOOR LOCKING SYSTEM.
Selector "P" Position-linked Door Unlock Function does not Operate Normally. < Vehicles with TC-SST >	INSPECTION PROCEDURE 5: SELECTOR "P" POSITION-LINKED DOOR UNLOCK FUNCTION DOES NOT OPERATE NORMALLY. < VEHICLES WITH TC-SST >