LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 28 (Parking Brakes - Lancer Evolution) >> Parking Brake Lining And Drum >> Removal And Installation >> Removal Service Points >> << A >> Rear Brake Caliper Assembly Removal

<< A >> Rear Brake Caliper Assembly Removal

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear brake caliper assembly with the brake hose kept attached.
  2. Secure the removed rear brake caliper assembly with a wire or other similar material at a position where it will not interfere with the removal and installation works.
scientia non olet · About LEMON Manuals