LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Manual Transaxle Overhaul - Lancer Evolution) >> Transaxle Case >> Disassembly And Assembly >> Assembly Service Points >> >> G << Oil Tank Cover Installation

>> G << Oil Tank Cover Installation

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Normally, it is not necessary to disassemble the oil tank cover. Install the cover only when the transaxle case is replaced with a new one.

Install the oil tank cover onto the new transaxle case. Stake at the illustrated six points to secure the cover in position.

Fig 1: Identifying Oil Tank Cover Onto Transaxle Case
G05394055Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals