LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Manual Transaxle Overhaul - Lancer Evolution) >> Transaxle Case >> Disassembly And Assembly >> Assembly Service Points >> >> C << Oil Seal Installation

>> C << Oil Seal Installation

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using the special tools, MB991115 and MB990938, indicated below, install the oil seal to the transaxle case.
    Fig 1: Identifying Special Tools (MB991115 And MB990938)
    G05394050Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  2. Apply specified transaxle oil to the oil seal lip area.

    Specified transaxle oil: 

    Mitsubishi Genuine DiaQueen New Multi Gear Oil SAE 75W-80 (GL-3) 

    Fig 2: Applying Specified Transaxle Oil To Oil Seal Lip Area
    G05394051Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals