LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Manual Transaxle Overhaul - Lancer Evolution) >> Reverse Idler Gear >> Inspection >> Needle Bearing

Needle Bearing

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Assemble the needle bearing with the reverse idler shaft and gear, and check that the bearing rotates smoothly without noise or play.
  2. Check that needle bearing retaining sleeve for deformation.
scientia non olet · About LEMON Manuals