<< B >> 3RD Speed Gear / 5TH Speed Gear Sleeve / 4TH Speed Gear / Needle Roller Bearing / 4TH Speed Gear Sleeve / Synchronizer Outer Ring / Synchronizer Cone / Synchronizer Inner Ring / 3RD-4TH Speed Synchronizer Sleeve / 3RD-4TH Speed Synchronizer Hub / Thrust Bearing / 3RD Speed Gear Removal
WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
Using special tool, MD998917, support the 3rd speed gear, and then remove the 3rd seed gear, thrust bearings, 3rd-4th speed synchronizer sleeve, 3rd-4th speed synchronizer hub, synchronizer outer ring, synchronizer inner ring, synchronizer cone, 4th speed gear, needle roller bearing, 4th speed gear sleeve and 5th speed gear sleeve.