LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Manual Transaxle Overhaul - Lancer Evolution) >> Input Shaft >> Disassembly And Assembly >> Assembly Service Points >> >> I << Oil Seal Installation

>> I << Oil Seal Installation

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

Using special tool, MD999601, drive the oil seal as deep as shown into place.

Fig 1: Identifying Oil Seal
G05393988Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Fig 2: Identifying Special Tool (MD999601)
G05393989Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals