LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Manual Transaxle Overhaul - Lancer Evolution) >> Center Differential >> Disassembly And Assembly >> Assembly Service Points >> >> C << Center Differential Drive Gear Installation

>> C << Center Differential Drive Gear Installation

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Apply specified sealant to the entire threaded portion of the bolt.

    Specified sealant: 

    3M™STUD Locking No.4710 or equivalent 

    Fig 1: Applying Specified Sealant To Threaded Portion Of Bolt
    G05394063Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  2. Tighten the bolts to the specified torque of 133 ± 4 N.m (98 ± 2 ft-lb) in the illustrated order.
    Fig 2: Identifying Bolts Tightening Sequence
    G05394064Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals