LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (Clutch Overhaul - Lancer Evolution) >> Clutch >> Removal And Installation >> Installation Service Points >> >> A << Release Fork Installation

>> A << Release Fork Installation

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

Apply specified grease to the illustrated positions of the release fork.

Specified grease: 

Mitsubishi Part No. 0101011 or equivalent 

Fig 1: Applying Specified Grease To Illustrated Positions Of Release Fork
G05393856Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.