LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Rear Axle - Lancer Evolution) >> Differential Carrier Assembly >> Disassembly And Reassembly >> Assembly Service Points >> >> C << Oil Seal Installation

>> C << Oil Seal Installation

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

Use special tool MB990727 to press-fit the oil seal.

Fig 1: Identifying Special Tool (MB990727)
G05394454Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals