LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Rear Axle - Lancer Evolution) >> Differential Carrier Assembly >> Disassembly And Reassembly >> Assembly Service Points >> >> A << Oil Seal Installation

>> A << Oil Seal Installation

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Use special tools MB990938 and MB991551 to press-fit the oil seal.
  2. Apply specified grease to the oil seal lip and driveshaft oil seal seating area.

    Specified grease: Vaseline 

    Fig 1: Applying Specified Grease To Oil Seal Lip And Driveshaft Oil Seal Seating Area
    G05394414Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals