LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Mechanical - Lancer Evolution) >> Crankshaft Pulley >> Removal And Installation >> Removal Service Points >> B: Crankshaft Pulley Center Bolt/Crankshaft Pulley Washer Removal

B: Crankshaft Pulley Center Bolt/Crankshaft Pulley Washer Removal

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Hold the crankshaft drive sprocket with special tools MB990767 and MD998719.
    2. Fig 1: Identifying Crankshaft Drive Sprocket With Special Tools MB990767 And MD998719
    G05374112Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  2. Loosen the crankshaft pulley center bolt and remove the crankshaft pulley center bolt and crankshaft pulley washer.
scientia non olet · About LEMON Manuals