C: Camshaft And Camshaft Sprocket Assembly (Intake Side) Installation

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

Align the intake side paint mark of the timing chain which was put at removal with the paint mark of the intake side camshaft sprocket, and install the camshaft sprocket to the timing chain.

Fig 1: Identifying Camshaft Marking Point

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Install the camshaft and camshaft sprocket assembly (intake side) to the cylinder head.