LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Heater, Air Conditioning And Ventilation - Lancer Evolution) >> Heater Unit And Blower Assembly >> Removal And Installation >> Removal Service Points >> << B >> Heater Unit And Deck CROSSMEMBER Assembly Removal

<< B >> Heater Unit And Deck CROSSMEMBER Assembly Removal

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the following connectors to gain access to the front deck crossmember.

Fig 1: Identifying Instrument Panel And Floor Wiring Harness Connectors
G05397394Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Fig 2: Identifying Instrument Panel And Front Door Wiring Harness Combination Connectors
G05397395Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
CONNECTOR NUMBER REFERENCE CHART

Connector number Connector name
C-23 Instrument panel wiring harness and floor wiring harness combination
C-24 Instrument panel wiring harness and floor wiring harness combination
C-33 Instrument panel wiring harness and console wiring harness combination
C-41 Instrument panel wiring harness and floor wiring harness combination
C-42 Instrument panel wiring harness and floor wiring harness combination
C-116 Instrument panel wiring harness and front door wiring harness (RH) combination
C-117 Instrument panel wiring harness and front door wiring harness (RH) combination
C-128 Instrument panel wiring harness and front door wiring harness (LH) combination
C-129 Instrument panel wiring harness and front door wiring harness (LH) combination
C-130 Instrument panel wiring harness and front wiring harness combination
C-131 Instrument panel wiring harness and front wiring harness combination
C-132 Instrument panel wiring harness and front wiring harness combination
C-133 Instrument panel wiring harness and roof wiring harness combination