LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Heater, Air Conditioning And Ventilation - Lancer Evolution) >> Compressor Assembly And Tension Pulley >> Disassembly And Assembly >> Assembly Service Points >> >> C << Self-Locking Nut Installation

>> C << Self-Locking Nut Installation

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

Using a special tool, as when removing the nut, secure the armature and tighten the self-locking nut.

scientia non olet · About LEMON Manuals