LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Clutch On-Vehicle Service - Lancer Evolution) >> Clutch Pedal And Master Cylinder >> Removal And Installation >> Removal Service Points >> << A >> Clutch Tube Assembly A Disconnection

<< A >> Clutch Tube Assembly A Disconnection

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • Do not remove O-rings and clips from the clutch tube assembly A and clutch master cylinder.
  • If the O-ring or clip is damaged, replace the relevant clutch tube assembly A or clutch master cylinder.
    Fig 1: Identifying Clutch Master Cylinder And Clutch Tube Assembly
    G05393842Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals