LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Steering -- Lancer Evolution) >> Steering Shaft >> Disassembly And Reassembly >> Disassembly Service Point >> << A >> Steering Lock Bolt Removal

<< A >> Steering Lock Bolt Removal

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Use a drill to make a hole just deeply enough for the tap to stand on the steering lock bolt.
    2. Fig 1: Sectional View Of Steering Lock Bolt
    G05394801Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  2. Use a left-hand thread tap to remove the steering lock bolt.
scientia non olet · About LEMON Manuals