LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Steering -- Lancer Evolution) >> Power Steering Hoses >> Removal And Installation >> Installation Service Points >> >> C << Pressure Hose Installation

>> C << Pressure Hose Installation

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: For additional procedural information, refer to TSB POWER STEERING HOSE INSTALLATION - SERVICE MANUAL REVISION .

Install the pressure hose plate with its marking located as shown in the figure.

Fig 1: Identifying Pressure Hose Plate
G05394824Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals