INSPECTION PROCEDURE 11: Oil Leakage from Hose Assembly: Diagnosis
WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
- STEP 1. Check the hose for damage or clogging.
Q: Is the hose damaged or clogged?
YES : Repair or replace it. Then go to Step 2.
NO : Go to Step 2.
- STEP 2. Retest the system.
Check that no oil is leaking.
Q: Is there oil leakage?
YES : Repeat from Step 1.
NO : The procedure is complete.