LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 11 (Exterior - Lancer Evolution) >> Door Mirror >> Inspection >> Remote Controlled Mirror Operation Check

Remote Controlled Mirror Operation Check

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

Check that the mirror moves as described in the table when each terminal is connected to the battery.

Fig 1: Identifying Remote Controlled Mirror Connector Terminals
G05384586Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
REMOTE CONTROLLED MIRROR CONNECTION CHART

Battery connection Direction operation
  • Connect terminal 8 to the negative battery terminal.
  • Connect terminal 6 to the positive battery terminal.
 Up
  • Connect terminal 8 to the positive battery terminal.
  • Connect terminal 6 to the negative battery terminal.
 Down
  • Connect terminal 8 to the negative battery terminal.
  • Connect terminal 7 to the positive battery terminal.
 Right
  • Connect terminal 8 to the positive battery terminal.
  • Connect terminal 7 to the negative battery terminal.
 Left
scientia non olet · About LEMON Manuals