LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 109 (Chassis Electrical - Lancer Evolution (4 Of 5)) >> Speaker >> On-Vehicle Service >> Buzz Noise Check Mode

Buzz Noise Check Mode

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

Inserting a CD during the speaker connection check mode shifts the mode to the buzz noise check mode, and the buzz noise sound of each speaker can be checked.

As with the speaker connection check mode, press the [CH6] button to switch the output speaker of the buzz noise check sound.

Check that the buzz noise sound is output from the output speaker of buzz noise check sound.

NOTE: "SPKR" is displayed as "BUZZ" during buzz noise check mode.
scientia non olet · About LEMON Manuals