LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 108 (Chassis Electrical - Lancer Evolution (2 Of 5)) >> Column Switch >> Inspection >> Wiper/Washer Switch Continuity Check >> < Vehicles With Lighting Control Sensor >

< Vehicles With Lighting Control Sensor >

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
TESTER CONNECTION SPECIFIED CONDITION

Switch position Tester connection Specified condition
OFF - Open circuit
Windshield rain sensitive wiper function adjusting knob 6-3 Operating the adjusting knob changes the resistance.
Windshield washer switch 6-7 Continuity exists (2 Ω or less)
Windshield wiper switch Hi 6-8 Continuity exists (2 Ω or less)
Lo 6-9 Continuity exists (2 Ω or less)
Auto 6-10 Continuity exists (2 Ω or less)
Mist 6-11 Continuity exists (2 Ω or less)
Fig 1: Identifying Wiper/Washer Switch Terminals (Vehicles With Lighting Control Sensor)
G05396930Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.