LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 106 (Chassis Electrical - Lancer Evolution (5 Of 5)) >> ETACS >> Special Tool >> Input Signal Procedures >> Inspection Procedure 12: ETACS-Ecu Does Not Receive Any Signal From The Hood Switch >> Technical Description (Comment)

Technical Description (Comment)

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

If there is an error to the hood switch input signal, the hood switch signal is no longer output to the communication line.

scientia non olet · About LEMON Manuals