LEMON Manuals
: Even more car manuals for everyone
Home
>>
Mitsubishi
>>
2010
>>
Lancer ES, Standard
>>
Repair and Diagnosis
>>
External Pages
>>
Different car
>>
Section 106 (Chassis Electrical - Lancer Evolution (5 Of 5))
>>
ETACS
>>
Special Tool
>>
Input Signal Procedures
>>
Inspection Procedure 11: ETACS-Ecu Does Not Receive Any Signal From The Column Switch Signal
>>
Troubleshooting Hints
Troubleshooting Hints
WARNING:
This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
The column switch may be defective
The LIN bus line may be defective