LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 106 (Chassis Electrical - Lancer Evolution (5 Of 5)) >> ETACS >> Special Tool >> Input Signal Procedures >> Inspection Procedure 10: ETACS-Ecu Does Not Receive Any Signal From The Hazard Warning Light Switch >> Notes

Inspection Procedure 10: ETACS-Ecu Does Not Receive Any Signal From The Hazard Warning Light Switch: Notes

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Hazard Warning Switch Input Circuit Diagram
G05397228Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals