Display Item List

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

DISPLAY ITEM LIST

Item No.	Item name	Data item	Unit
01	Odometer	Total driving distance after the diagnostic trouble code is generated	km*1
02	Ignition cycle	Number of times the ignition switch is turned "ON" or "LOCK (OFF)" after the past failure transition	Number of counts is displayed.
03	Elapsed time after failure	Total elapsed time after a diagnostic trouble code is generated	min*2
04	Current trouble accumulative time	Cumulative time for current malfunction of diagnostic trouble code	min
NOTE: 1: If a failure occurs to both the ASC-ECU and ETACS-ECU, 0000 km or FFFF km is displayed to the scan tool MB991958. 2: Total elapsed time can be stored up to 65, 534 minutes (45.5 days). The display of scan tool is fixed to 65, 534 minutes after 65, 534 minutes have elapsed. Or, if the battery is disconnected, the total elapsed time cannot be measured properly. Thus, 65, 535 minutes (null value) is displayed. Because it is calculated based on the ETACS-ECU information, the correct display may not be shown if the ETACS-ECU has had a timeout.