Position Light Bulb Replacement

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

When replacing the right bulb, lift the radiator condenser tank upward, and remove it. When replacing the left bulb, remove the relay box. < Vehicles without discharge headlight >

Fig 1: Identifying Radiator Condenser Tank
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Fig 2: Relay Box With Torque Specifications
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Remove the front splash shield assembling clip shown in the figure, and turn up the front splash shield. < Vehicles with discharge headlight >

Fig 3: Locating Front Splash Shield Assembling Clip
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Twist the position light socket to remove.

Fig 4: Twisting Position Light Socket
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.