LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 105 (Chassis Electrical - Lancer Evolution (1 Of 5)) >> Headlight >> Diagnosis >> Symptom Procedures >> Inspection Procedure 6: High-Beam Indicator Light Does Not Illuminate Normally >> Technical Description (Comment)

Technical Description (Comment)

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

If the high-beam indicator does not illuminate normally, the harness in the CAN bus lines, connector(s), ETACS-ECU, or combination meter may have a problem.