1. Reminder Reset (Indicator Off)
WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
- Be careful not to execute "1 Reminder reset (Indicator off)" again after erasing the service reminder warning indicator which is currently output, because the next warning period will be cancelled.
- If the next warning period is cancelled by mistake, the cancelled warning period can be restored by executing "5 Periodic reminder schedule set" to set a schedule different from the current one once, and then returning it to the previous schedule.
The service reminder warning indicator which is currently output can be cancelled.
NOTE:
In addition to the operation of the scan tool MB991958, the service reminder warning indicator can be cancelled by operating the multi information meter switch on the combination meter. Refer to.
- On the "Service Reminder" screen, select "1 Reminder reset (Indicator off)".NOTE: The screen indicates that the warning period (Nos. 1 and 2 in the data list) is "0 mile." and "0 month".
- Press the "OK" button.
- The current warning indicator is cancelled, and the next warning period is displayed.NOTE: The screen indicates that the warning period (Nos. 1 and 2 in the data list) is "7, 500 mile" and "6 month".