LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 105 (Chassis Electrical - Lancer Evolution (1 Of 5)) >> Battery >> On-Vehicle Service >> Charging

On-Vehicle Service: Charging

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • Do not perform boost charging.
  • The charging current shall be 5.0 A or less.
  • The battery shall be charged by referring to the graph 1 of the battery test (BATTERY TEST  ).
  • Open flame around the battery while charging may cause explosion.
  • While charging, pay attention not to cause sparks or other risks.
  • Perform the operation in a well-ventilated place.
  1. Remove the battery from the vehicle.
  2. Set the charging current to 5 amps or less and charge the battery by referencing the charging time in Graph 1 described in BATTERY TEST .

How to judge the completion of charging 

Perform the battery test to check if it is normal.