LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Lubrication - Lancer Evolution) >> Oil Pump Chain >> Removal And Installation >> Removal Service Point >> << A >> Engine Oil Pump Sprocket Center Bolt/Engine Oil Pump Drive Chain And Engine Oil Pump Sprocket Removal

<< A >> Engine Oil Pump Sprocket Center Bolt/Engine Oil Pump Drive Chain And Engine Oil Pump Sprocket Removal

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Hold the engine oil pump sprocket with special tool MB991346.
  2. Loosen the engine oil pump sprocket center bolt and remove the engine oil pump drive chain and engine oil pump sprocket.
    Fig 1: Holding Engine Oil Pump Sprocket With Special Tool MB991346
    G05374203Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals