LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Lubrication - Lancer Evolution) >> Oil Pump Chain >> Removal And Installation >> Installation Service Points >> >> B << Engine Oil Pump Sprocket/Engine Oil Pump Drive Chain Installation

>> B << Engine Oil Pump Sprocket/Engine Oil Pump Drive Chain Installation

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Set the No. 1 piston at top dead center of the compression stroke.
  2. Install the engine oil pump sprocket to the engine oil pump case.
  3. Install the engine oil pump drive chain to the crankshaft sprocket.
  4. Install the engine oil pump drive chain to the engine oil pump sprocket.
scientia non olet · About LEMON Manuals