LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Intake And Exhaust - Lancer Evolution) >> Exhaust Manifold And Turbocharger >> Removal And Installation >> Removal Service Points >> << B >> Waste Gate Actuator Removal

<< B >> Waste Gate Actuator Removal

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Never loosen the locking nuts and adjusting rod of the waste gate actuator.
Fig 1: Identifying Locking Nuts And Adjusting Rod
G05393675Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals