LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Intake And Exhaust - Lancer Evolution) >> Exhaust Manifold And Turbocharger >> Removal And Installation >> Removal Service Points >> << A >> Turbocharger Compressor Bracket Removal

<< A >> Turbocharger Compressor Bracket Removal

WARNING: This page is about a different car, the 2008 Mitsubishi Lancer. However, it is still accessible from the selected car via links, so may be relevant.

Use special MB992274 to remove the turbocharger compressor bracket mounting bolt (cylinder block side).

Fig 1: Removing Turbocharger Compressor Bracket Mounting Bolt (Cylinder Block Side)
G05393674Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.