>>C<< Fuel Main Pipe Connection

Before the installation, push up the retainer of the fuel main pipe connector.

Fig 1: Pushing Retainer Of Fuel Main Pipe Connector
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Connect the connector of fuel main pipe to the fuel pump module securely.
CAUTION:
- When pushing in the retainer of the fuel high-pressure hose connector, pay attention to avoid damage to the retainer.
- After the installation of the fuel high-pressure hose, slightly pull the fuel high-pressure hose to check that it is connected securely. At this time, also check that there is approximately 1 mm (0.04 inch) play.
  
  Fig 2: Connecting Connector Of Fuel Main Pipe To Fuel Pump Module
  Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Push in the retainer of the fuel main pipe connector to lock the fuel main pipe and fuel pump module.