LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel Supply System - Lancer >> FUEL TANK (2.0L ENGINE Turbo) >> Disassembly And Assembly >> Disassembly Service Points >> >>A<< Fuel Pump Module Installation

>>A<< Fuel Pump Module Installation

CAUTION:
  • When installing the fuel pump module into the fuel tank from the service hole, be careful not to damage the gauge unit and the float of the fuel pump module. In addition, be careful that the float does not catch the fuel tank suction hose in the fuel tank.
  • When installing the fuel pump module into the fuel tank from the service hole, check that the moving part of the gauge works smoothly.

While inserting the fuel pump module into the fuel tank from the service hole, connect the fuel tank suction hose, and install the fuel pump module to the fuel tank.

Fig 1: Identifying Fuel Tank Suction Hose And Fuel Pump Module
G06671727Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.