General Information
The 4B11 (2.0 L) engine is an in-line four-cylinder engine. The cylinder numbers are assigned as 1-2-3-4 from the front of the engine (timing chain side). The firing order is 1-3-4-2.
ITEM SPECIFICATION
| Item | Specification | ||
|---|---|---|---|
| Type | In-line DOHC | ||
| Number of cylinders | 4 | ||
| Bore mm (in) | 86 (3.39) | ||
| Stroke mm (in) | 86 (3.39) | ||
| Total displacement cm3 (cu. in) | 1,998 (121.9) | ||
| Compression ratio | 10.0 | ||
| Firing order | 1-3-4-2 | ||
| Valve timing | Intake valve | Opens (BTDC) | 0° -25° <Exept CALIFORNIA> |
| 3° -28° <CALIFORNIA> | |||
| Closes (ABDC) | 48° -23° <Exept CALIFORNIA> | ||
| 45° -20° <CALIFORNIA> | |||
| Exhaust valve | Opens (BBDC) | 44° -24° <Exept CALIFORNIA> | |
| 41° -21° <CALIFORNIA> | |||
| Closes (ATDC) | 0° -20° <Exept CALIFORNIA> | ||
| 3° -23° <CALIFORNIA> | |||
| Lubrication system | Pressure feed, full-flow filtration | ||
| Oil pump type | Trochoid type | ||