LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Intake System And Exhaust System - Lancer >> On-Vehicle Service >> Turbocharger WASTEGATE Solenoid Check >> B Check of coil resistance

B Check of coil resistance

  1. Measure the resistance between the solenoid terminals.

    Standard value: 29 - 35 Ω at 20°C (68°F)

    Fig 1: Measuring Resistance Between Solenoid Terminals
    G06671810Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals