LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Intake System And Exhaust System - Lancer >> Intake Manifold >> Removal And Installation (2.0L Engine Turbo) >> Installation Service Points >> >>A<< Number 2 Intake Air Temperature Sensor Installation

>>A<< Number 2 Intake Air Temperature Sensor Installation

Tighten the number 2 intake air temperature sensor to the specified torque by using special tool MB992188.

Tightening torque: 14 ± 1 N.m (120 ± 13 in-lb) 

Fig 1: Identifying Intake Air Temperature Sensor
G06671821Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals