LEMON Manuals
: Even more car manuals for everyone
Home
>>
Mitsubishi
>>
2010
>>
Lancer ES, Standard
>>
Repair and Diagnosis
>>
Engine Mechanical
>>
Mechanical
>>
Engine Intake System And Exhaust System - Lancer
>>
Intake Manifold
>>
Removal And Installation (2.0L Engine Non-Turbo, 2.4L Engine)
>>
Installation Service Points
>>
>>B<< Screw Installation
>>B<< Screw Installation
CAUTION:
Do not over-tighten. As the self-forming-type screw is used, the excessive torque can damage the intake manifold threads.