>>A<< O-Ring/Purge Control Solenoid Valve/O-Ring/Manifold Absolute Pressure Sensor Installation
CAUTION:
- When applying the engine oil, make sure not to allow the engine oil to enter the intake manifold inside.
- Install the manifold absolute pressure sensor, taking care that no shock is applied to it.
- Do not use a manifold absolute pressure sensor that has been dropped.
- Apply a small amount of new engine oil to the O-ring.
- While turning the purge control solenoid valve or manifold absolute pressure sensor to right and left, install the O-ring to the purge control solenoid valve or manifold absolute pressure sensor with care to avoid damage to the O-ring.
- Turning the purge control solenoid valve or manifold absolute pressure sensor to right and left, install it to the intake manifold with care not to damage the O-ring. After the installation, check for its smooth rotation.