LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Intake System And Exhaust System - Lancer >> EXHAUST MANIFOLD AND TURBOCHARGER (2.0L ENGINE Turbo) >> Removal And Installation >> Installation Service Points >> >>A<< Turbocharger Installation

>>A<< Turbocharger Installation

  1. Clean the fitting between turbocharger oil tube and turbocharger water pipe, the inside of eye bolts, the inside of tube and the inside of pipe for clogs.
    CAUTION: Take care not to allow foreign objects to get into the turbocharger.
  2. Clean or use compressed air to remove any carbon particles stuck to the oil passage of the turbocharger.
  3. Refill new engine oil at the turbocharger oil feed tube fitting hole of the turbocharger.
scientia non olet · About LEMON Manuals