LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> Electrical >> Charging Systems >> Charging System -- Lancer >> Generator Assembly >> Removal And Installation (2.0L Engine Non-Turbo, 2.4L Engine) >> Installation Service Points >> >>A<< Grounding Cable Installation

>>A<< Grounding Cable Installation

  1. Install the grounding cable within the area marked with A in the illustration.
  2. Tighten the generator assembly mounting bolt to the specified torque.

    Tightening torque: 44 ± 10 N.m (33 ± 7 ft-lb) 

    Fig 1: Identifying Grounding Cable Terminal
    G06671862Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals