LEMON Manuals: Even more car manuals for everyone

Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> Drivelines & Axles >> Driveshaft & Universal Joints >> Propeller Shaft -- Lancer >> Propeller Shaft >> Inspection >> Propeller Shaft RUNOUT

Propeller Shaft RUNOUT

Check the deflection of the front, center and rear shafts.

Limit: 0.5 mm (0.02 inch)

Fig 1: Measuring Propeller Shaft Runout

G06672468

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

scientia non olet · About LEMON Manuals