LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2010 >> Lancer ES, Standard >> Repair and Diagnosis >> Drivelines & Axles >> Driveshaft & Universal Joints >> Propeller Shaft -- Lancer >> Propeller Shaft >> Disassembly And Assembly >> Assembly Service Points >> >>C<< Boot Band Installation

>>C<< Boot Band Installation

CAUTION:
  • Tighten the boot part in opposite direction of convex part for bleeding the boot.
  • If there is grease in the convex part, wipe out the grease in order to bleed the boot.
    Fig 1: Identifying Boot Band Installation Position
    G06672482Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals