General Information: Notes

The propeller shaft has the following features:

• The 3-piece, 4-joint type propeller shaft with a center bearing is adopted.
• For the joint Nos. 1, 2, and 4, the caulking type universal joint with excellent properties of balance accuracy is equipped.
• For joint No. 3, the lightweight and compact LJ (Lebro Joint) is equipped.
• The dual anti-vibration construction is located at the center bearing to vehicle body joint, reducing vibration (gear noise).
• The heat protector is adopted to the center bearing bracket.
• The lead-free grease is adopted for the universal joint and LJ (Lebro Joint).