LEMON Manuals
: Even more car manuals for everyone
Home
>>
Mitsubishi
>>
2010
>>
Lancer ES, Standard
>>
Repair and Diagnosis
>>
Brakes
>>
Traction Control
>>
Active Stability Control System (ASC) -- Lancer
>>
Diagnosis
>>
Symptom Procedures
>>
Inspection Procedure 4: ABS warning light does not illuminate when ignition switch is turned to the ON position (engine stopped)
>>
Comments On Trouble Symptom
Comments On Trouble Symptom
This may be caused by faults in the CAN bus line, ETACS-ECU, combination meter or ASC-ECU.